diff --git a/board/denx/m28evk/start.S b/board/denx/m28evk/start.S
index cf675995..94696d6 100644
--- a/board/denx/m28evk/start.S
+++ b/board/denx/m28evk/start.S
@@ -58,54 +58,58 @@
 .globl _start
 _start:
 	b	reset
-#ifdef CONFIG_SPL_BUILD
-/* No exception handlers in preloader */
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	b	reset
-	ldr	pc, _hang
-	ldr	pc, _hang
+	b	undefined_instruction
+	b	software_interrupt
+	b	prefetch_abort
+	b	data_abort
+	b	not_used
+	b	irq
+	b	fiq
 
-_hang:
-	.word	do_hang
-/* pad to 64 byte boundary */
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-#else
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
+/*
+ * Vector table, located at address 0x20.
+ * This table allows the code running AFTER SPL, the U-Boot, to install it's
+ * interrupt handlers here. The problem is that the U-Boot is loaded into RAM,
+ * including it's interrupt vectoring table and the table at 0x0 is still the
+ * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table
+ * is still used.
+ */
+_vt_reset:
+	.word	_reset
+_vt_undefined_instruction:
+	.word	_hang
+_vt_software_interrupt:
+	.word	_hang
+_vt_prefetch_abort:
+	.word	_hang
+_vt_data_abort:
+	.word	_hang
+_vt_not_used:
+	.word	_reset
+_vt_irq:
+	.word	_hang
+_vt_fiq:
+	.word	_hang
 
-_undefined_instruction:
-	.word undefined_instruction
-_software_interrupt:
-	.word software_interrupt
-_prefetch_abort:
-	.word prefetch_abort
-_data_abort:
-	.word data_abort
-_not_used:
-	.word not_used
-_irq:
-	.word irq
-_fiq:
-	.word fiq
+reset:
+	ldr	pc, _vt_reset
+undefined_instruction:
+	ldr	pc, _vt_undefined_instruction
+software_interrupt:
+	ldr	pc, _vt_software_interrupt
+prefetch_abort:
+	ldr	pc, _vt_prefetch_abort
+data_abort:
+	ldr	pc, _vt_data_abort
+not_used:
+	ldr	pc, _vt_not_used
+irq:
+	ldr	pc, _vt_irq
+fiq:
+	ldr	pc, _vt_fiq
 
-#endif	/* CONFIG_SPL_BUILD */
 	.balignl 16,0xdeadbeef
 
-
 /*
  *************************************************************************
  *
@@ -162,7 +166,7 @@
  * the actual reset code
  */
 
-reset:
+_reset:
 	/*
 	 * Store all registers on old stack pointer, this will allow us later to
 	 * return to the BootROM and let the BootROM load U-Boot into RAM.
@@ -220,177 +224,11 @@
 	mcr	p15, 0, r0, c1, c0, 0
 
 	mov	pc, lr		/* back to my caller */
+
+	.align	5
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	@ carve out a frame on current user stack
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
-	ldr	r2, IRQ_STACK_START_IN
-	@ get values for "aborted" pc and cpsr (into parm regs)
-	ldmia	r2, {r2 - r3}
-	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}	@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp		@ save current stack into r0 (param register)
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^		@ Calling SP, LR
-	str	lr, [r8, #0]		@ Save calling PC
-	mrs	r6, spsr
-	str	r6, [r8, #4]		@ Save CPSR
-	str	r0, [r8, #8]		@ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4		@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]	@ save caller lr in position 0 of saved stack
-	mrs	lr, spsr	@ get the spsr
-	str	lr, [r13, #4]	@ save spsr in position 1 of saved stack
-	mov	r13, #MODE_SVC	@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13	@ switch modes, make sure moves will execute
-	mov	lr, pc		@ capture return pc
-	movs	pc, lr		@ jump to next instruction & switch modes.
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-#endif	/* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
-	.align	5
-do_hang:
+_hang:
 	ldr	sp, _TEXT_BASE			/* switch to abort stack */
 1:
 	bl	1b				/* hang and never return */
-#else	/* !CONFIG_SPL_BUILD */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-#endif	/* CONFIG_SPL_BUILD */